IDS-55250: Penguin II device
The Penguin II device uses specialized plugs designed to measure implant stability and osseointegration level. These plugs emit magnetic resonance and capture the returning frequency, translating it into precise ISQ levels. Exclusively designed for use with the Penguin device, these plugs are compatible with different platforms (each plug for a different platform, for selection). Crafted from top-quality materials, they are reusable and capable of enduring up to 20 sterilizations in an autoclave.
Plugs List:
IDS-55014 - Straumann tissue level, regular & wide neck
IDS-55020 - Adin touareg close fit WP 4.3,5.0
IDS-55021 - AB Dental narrow platform (NP)
IDS-55027 - MIS narrow / Straumann BLX
IDS-55034 - For Israeli internal hexagon systems (DSI)
IDS-55033 - MIS multi-unit system
IDS-55037 - Alfa Gate M+ RP 4.3 - 5.0
IDS-55041 - MIS Conical connection wide (C1)
IDS-55044 - Alfa Gate M+ NP 3.5
IDS-55049 - MIS Seven Standard / AB Internal Hex (SP)
IDS-55051 - AlphaBio/MIS/Tag for wide inner hexagon systems
IDS-55059 - Adin/Alfa Gate for narrow cone systems
IDS-55061 - Straumann bone level tapered narrow (NC)
IDS-55062 - Straumann bone level tapered regular (RC)
IDS-55064 - Straumann bone level tapered SC 2.9
IDS-55065 - Alpha-Bio conical hex 3.2
IDS-55066 - Paltop PCA conical
IDS-55076 - Straumann tissue level, narrow neck crossfit (NNC)
IDS-55081 - MIS conical connection narrow (C1, V3)
IDS-55087 - MIS conical standard C1,V3 / Ditron Ultimate/MPI
IDS-55115 - Straumann tissue level X (TLX) / MIS connect
IDS-55003 - Driver for plugs
SK-DSY: DSI Grip surgical Full Kit
GYPD200L25C: Pilot drill DLC Ø2.0mm L 25mm
GYCD2032L25C: Conical Drill Ø2.0-3.0mm L 25mm
GYTD320L43: Long Twist Drill Ø3.2mm L 43mm
RDK24250: Implant Ratchet Driver Ø2.42mm L 25mm
MM24028: Implant Motor Mount Driver Ø2.42mm L 28mm
RDK125250: Prosthetic Ratchet Driver Ø1.25mm L 25mm
MM12528: Prosthetic Motor Mount Driver Ø1.25mm L 28mm
HDK125250: Prosthetic Manual Driver Ø1.25mm L 25mm
DNP200: Pilot Drill DLC Ø2.0mm L 16mm
SD2028L16C: Step Drill DLC Ø2.0x2.8mm L 16mm
SD2832L16C: Step Drill DLC Ø2.8x3.2mm L 16mm
SD32365L16C: Step Drill DLC Ø3.2x3.65mm L 16mm
TDE: Drill Extender
DS-X200: Osteotome Ø2.0mm L 155mm
DS-X300: Osteotome Ø3.0mm L 155mm
RHD: Surgical Driver Handle Ø6.35mm L 175mm
1000201: Torque Ratchet Wrench Ø6.35mm Torque 10-35 Ncm
IPR-SH-24: Proxicut set - includes 1 holder, 24x blades and 24x strips
IPR-PS: 1 Strip Holder, 1 Key, 1 Long Handle and 12 of each Proxistrip Saw Blades, Diamond Strips Coarse, Medium and Fine
IPR-ST: 12 Proxicut saws
IRP-ASC: 12 Proxicut strips
IPR-ST2: 12 Proxistrip saws
IRP-ASC2: 12 Proxistrip strips coarse
IRP-ASM2: 12 Proxistrip strips medium
IRP-ASF2: 12 Proxistrip strips fine
SD-MGTR: Full Kit
SD-GD20: guide drill Ø2.0mm
SD-RM33, SD-RM37: SD-reamer Ø3.3, 3.7mm
SDADP-01: handpiece condencer
LASC-70: side cutter Ø7.0mm
LASR-60, LASR-80: sinus reamer Ø6.0, 8.0mm
LAR-R80, LAR-F80: sinus reamer Ø8.0mm
LAC-60: side cutter Ø6.0mm
LAD-80: sinus drill Ø8.0mm
SDEXP-01, SDEXP-02, SDEXP-03, SDEXP-04, SDEXP-05: expander drill Ø(1.8/2.5mm), (2.0/3.0mm), (2.5/3.5mm), (2.8/4.0mm), (3.0/4.5mm)
SDST-03, SDST-04, SDST-05, SDST-06, SDST-07, SDST-08: stopper L 3, 4, 5, 6, 7, 8mm
SDSAW-09, SDSAW-11: saw disc Ø9.0, 11.0mm
SDWRH-00: ratchet wrench
P-DR20: positioning drill Ø2.0mm
PG-060, PG-075, PG-090, PG-105: positioning guide Ø6.0, 7.5, 9.0, 10.5mm
GP-060, GP-075, GP-090, GP-105: 2x guide pin each size Ø6.0, 7.5, 9.0, 10.5mm
SCL-05: Chisel curved wide 1.0mm
TOLA2-01, TOLA2-02, TOLA2-03, TOLA2-04: curretes
PK001: Full kit
RDK125100, RDK125150: Ratchet driver for abutments Ø1.25mm L 10 and 15mm
HDK125100, HDK125150: Hand driver for abutments Ø1.25mm L 10 and 15mm
MM12515, MM12528: Motor-mount driver for abumtments Ø1.25mm L 15 and 28mm
MMRA: Motor-mount to ratchet adapter
RDK-MU10: Ratchet driver for multi unit M1.4
1000201: Torque ratchet 10-35Ncm
RCCON: Wrench condenser
TH-01: Turning handle
DS-MAAD: Special motor-mount driver for angulated Ti-Base abutment (optional)
SK003: DSI full surgical kit
LD150: lance drill Ø1.5mm
PD190: pilot drill Ø1.9mm
PD200, TD280, TD320, TD365, TD400, TD420, TD450, TD520: Cylindrical drills Ø 2.0, 2.8, 3.2, 3.65,4.0,4.2, 4.5 and 5.2mm
CD375, CD500: Countersink drills Ø3.75-4.2mm, Ø5.0-6.0mm
TDE: drill extender
RDS2010, RDS2015: ratchet driver Ø2.00mm, L (10mm, 15mm) for narrow implant Ø3.00mm
RDK24100, RDK24150: ratchet driver Ø2.42mm, L (10mm, 15mm) for implants
RDK125100, RDK125150: ratchet driver Ø1.25mm, L (10mm, 15mm) for abutments
HDK125100, HDK125150: hand abutment driver Ø1.25mm L (10mm, 15mm)
SPP100, SPP160: Jag parallel guide pins - L10,16mm
MM12520, MM12528: motor mount hex driver Ø1.25mm, L(20, 28mm) for abutments
MM24220, MM24028: motor mount hex driver Ø2.42mm, L(20, 28mm) for implants
SR: wrench ratchet 6.35 hexagonal head
1000201: torque ratchet - torque 10-35 Ncm
DPKOP: depth gauge measuring tool
PAL94150: removable stainless surgical tray
EVI0835, EVI1035, EVI1135, EVI1335, EVI1635: Ø3.5mm L (8, 10, 11.5, 13 and 16mm)
EVI0838, EVI1038, EVI1138, EVI1338, EVI1638: Ø3.8mm L (8, 10, 11.5, 13 and 16mm)
EVI0842, EVI1042, EVI1142, EVI1342, EVI1642: Ø4.2mm L (8, 10, 11.5, 13 and 16mm)
EVI0845, EVI1045, EVI1145, EVI1345, EVI1645: Ø4.5mm L (8, 10, 11.5, 13 and 16mm)
EVI0850, EVI1050, EVI1150, EVI1350, EVI1650: Ø5.0mm L (8, 10, 11.5, 13 and 16mm)
XDSY1042, XDSY1142, XDSY1342, XDSY1642, XDSY1842, XDSY2042, XDSY2242, XDSY2542: Grip implant Ø4.2mm L 10, 11.5, 13, 16, 18, 20, 22, 25mm
XDSY0850, XDSY1050, XDSY1150, XDSY1350, XDSY1650, XDSY1850, XDSY2050: Grip implant Ø4.2mm L 8, 10, 11.5, 13, 16, 18, 20mm
XDSY0860, XDSY1060, XDSY1160, XDSY1360, XDSY1660: Grip implant Ø4.2mm L 8, 10, 11.5, 13, 16mm
DFI0835, DFI1035, DFI1135, DFI1335, DFI1635: Ø3.5mm H (8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0638, DFI0838, DFI1038, DFI1138, DFI1338, DFI1638: Ø3.75mm H (6, 8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0642, DFI0842, DFI1042, DFI1142, DFI1342, DFI1642: Ø4.2mm H (6, 8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0650, DFI0850, DFI1050, DFI1150, DFI1350, DFI1650: Ø5.0mm H (6, 8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0660, DFI0860, DFI1060, DFI1160, DFI1360: Ø6.0mm H (6, 8, 10, 11.5, and 13mm) Classic Cone Implant
ULF-A1: DSI UniLite Flow ,2 syringes 2g each, Shade A1
ULF-A2: DSI UniLite Flow ,2 syringes 2g each, Shade A2
ULF-A3: DSI UniLite Flow ,2 syringes 2g each, Shade A3
ULF-A35: DSI UniLite Flow ,2 syringes 2g each, Shade A3.5
ULF-B1: DSI UniLite Flow ,2 syringes 2g each, Shade B1
ULF-B2: DSI UniLite Flow ,2 syringes 2g each, Shade B2
ULF-C2: DSI UniLite Flow ,2 syringes 2g each, Shade C2
ULF-O: DSI UniLite Flow ,2 syringes 2g each, Opaque A2
RDKC-NP10, RDKC-NP15: ratchet driver Ø2.25 for NP platform Ø3.5mm L 10, 15mm
MMIC-NP22, MMIC-NP28: motor mount driver Ø2.25 NP platform Ø3.5mm L 22, 28mm
RDKC-RP10, RDKC-RP15: ratchet driver Ø2.65 for RP platform Ø4.3-5.0mm L 10, 15mm
MMIC-RP22, MMIC-RP28: motor mount driver Ø2.65 RP platform Ø4.3-5.0mm L 22, 28mm
SD-GBR: Full Kit
SDS-140-060, SDS-140-080, SDS-140-100: screws Ø1.4mm L (6.0, 8.0, 10.0mm)
SDS-160-060, SDS-160-080, SDS-160-100: screws Ø1.6mm L (6.0, 8.0, 10.0mm)
SDB-140-035: purple tack Ø2.5/0.85, L (3.5mm)
SDB-140-050: blue tack Ø2.5/0.85, L (5.0mm)
DH-01: driver handle
TA-01: tack applicator
TH-01: turning handle
SD-PD12, SD-PD14, SD-PD20: GBR pilot drill Ø1.2, 1.4, 2.0mm
TR-01, TR-02, TR-03: drivers L ( 20, 26, 52mm)
NLBC-50: NLBC drill
NLBC-ST5: NLBC stopper
BT-03, BT05: bone tack case (red and blue) for 20 tacks
SPD-T36-022: titanium membrane (pores) Ø0.6mm, size 36.0x22.0mm
SDP-S22-015, SDP-S44-044: titanium membrane (pores) Ø1.4mm, size 22.0x15.0mm, 44.0x44.0mm
MT-414: mallet
SD-IPD/SD-IPD2: Full kit
S-12, L-12: Ø1.2mm L (23.5 and 30mm) compatible (Biomet 3i / Dentsply Xive / DIO UF / Global D / Hiossen / Keystone Renova, Restore / Megagen / Neo Biotech / Osstem / Tekka)
S-125, L-125: Ø1.25mm L (23.5 and 30mm) compatible (AB-Dent / Adin / Alpha-bio / Anthorgyr / BEGO / Bio Horizon External, Internal / Camlog / Cortex / Dentis / Dentium / Ditron / DSI / Implant Direct / Key Stone (Paltop), Prime Connex / Lasak Bioniq / MIS internal hex / Zimmer)
S-13, L-13: Ø1.3mm L (23.5 and 30mm) compatible (Astratech Ev / DYNA / Kentec / Platon)
S-BM, L-BM: Ø1.7mm L (23.5 and 30mm) compatible (Nobel Active / Branemark / Replace Select etc)
S-SM, L-SM: Ø1.7mm L (23.5 and 30mm) compatible (Straumann)
TH-01: turning handle
R.C CON: wrench condenser
ratchet wrench included only in SD-IPD2 kit
DSL-RP1810, DSL-RP1820, DSL-RP1830, DSL-RP1840: Angulated lock attachment 18°
DSL-RP3010, DSL-RP3020, DSL-RP3030, DSL-RP3040: Angulated lock attachment 30°
PDSL-RP1810, PDSL-RP1820, PDSL-RP1830, PDSL-RP1840: Angulated lock attachment 18° Kit
PDSL-RP3010, PDSL-RP3020, PDSL-RP3030, PDSL-RP3040: Angulated lock attachment 30° Kit
SD-CL: Full kit
SD-GD20: guide drill Ø2.0mm
SD-RM28, SD-RM33, SD-RM37: SD- Reamer Ø2.8, 3.3, 3.7mm
SDST-03, SDST-04, SDST-05, SDST-06, SDST-07, SDST-08: crestal stopper L (3, 4, 5, 6, 7, 8mm)
LAST-01, LAST-10, LAST-15, LAST-20, LAST-25: lateral stopper L (0.5, 1.0, 1.5, 2.0, 2.5mm)
SDWRH-00: ratchet wrench
LASC-70: lateral side cutter Ø7.0mm
LACD-80: lateral core drill Ø8.0mm
LASR-80: lateral sinus reamer Ø8.0mm
CLS30, CLS35: crestal aqua tip Ø3.0, 3.5mm
SDADP-02: handpiece condenser
R.C EXT: ratchet extension
TOLA2-01, TOLA2-02, TOLA2-03: curette
MP-BP: bone packer
STB: silicone tube
SD-TOLA2: DSI SD-TOLA 2 Sinus lift full kit
LASC-50, LASC-70: lateral side cutter Ø5.0, 7.0mm
LACD-60, LACD-80: lateral core drill Ø6.0, 8.0mm
LASD-R80, LASD-F80: lateral sinus drill Ø8.0mm
LASR-60, LASR-80: lateral sinus reamer: Ø6.0, 8.0mm
LAST-05, LAST-10, LAST-15, LAST-20, LAST-25: stoppers L (0.5, 1, 1.5, 2, 2.5mm)
TOLA2-01, TOLA2-02, TOLA2-03, TOLA2-04: curettes
SD-BMS: Full kit
SDEXP-01, SDEXP-02, SDEXP-03, SDEXP-04, SDEXP-05: expander drill Ø1.8/2.5, 2.0/3.0, 2.5/3.5, 2.8/4.0, 3.0/4.5mm
SDADP-01: handpiece condenser
SDGDL-02: guide drill
SDSAW-07, SDSAW-09: saw disk Ø7.0, 9.0mm
WA-01: wrench adapter
SA-01: spreading adapter
SP-01: spreading pin
CT-50: contouring bur Ø5.0mm
NLBC-50: NLBC drill Ø5.0mm
NLBC-ST5: stopper for NLBC drill
SDWRH-00: ratchet wrench
SCL-05: curved chisel
SBI0835, SBI1035, SBI1135, SBI1335, SBI1635: Ø3.5mm H (8, 10, 11.5, 13 and 16mm) Blue line implant
SBI0638, SBI0838, SBI1038, SBI1138, SBI1338, SBI1638: Ø3.75mm H (6, 8, 10, 11.5, 13 and 16mm) Blue line implant
SBI0642, SBI0842, SBI1042, SBI1142, SBI1342, SBI1642: Ø4.2mm H (6, 8, 10, 11.5, 13 and 16mm) Blue line implant
SBI0650, SBI0850, SBI1050, SBI1150, SBI1350, SBI1650: Ø5.0mm H (6, 8, 10, 11.5, 13 and 16mm) Blue line implant
SBI0660, SBI0860, SBI1060, SBI1160, SBI1360: Ø6.0mm H (6, 8, 10, 11.5, and 13mm) Blue line implant
LD120, LD150: lance drill Ø1.2, 1.5mm
PD190: marking drill Ø1.9mm
TDE: drill extender
CD375, CD500: countersink drill Ø3.75-4.2mm, 5.0-6.0mm
TB200, TB300, TB400, TB500: Ø2.0-3.0mm, 3.0-4.0mm, 4.0-5.0mm, 5.0-6.0mm
TP30, TP40, TP45, TP50: Ø3.0, 4.0, 4.5, 5.0mm
DR300, DR320, DR360, DR400, DR420: smart drills Ø2.8, 3.2, 3.6, 4.0, 4.2mm
PMUA-NO10, PMUA-NO20, PMUA-NO30, PMUA-NO40, PMUA-NO50: Multi Unit 1.4M Straight Kit 1mm, 2mm, 3mm, 4mm, 5mm abutment height.
PMUA-NO-1720, PMUA-NO-1730, PMUA-NO-1740, PMUA-NO-1750: Multi Unit 1.4M Angulated Kit 17° - 2mm, 3mm, 4mm, 5mm abutment height.
PMUA-NO-3020, PMUA-NO-3030, PMUA-NO-3040, PMUA-NO-3050: Multi Unit 1.4M Angulated Kit 30° - 2mm, 3mm, 4mm, 5mm abutment height.
PMUA-NO-4520, PMUA-NO-4530, PMUA-NO-4540, PMUA-NO-4550: Multi Unit 1.4M Angulated Kit 45° - 2mm, 3mm, 4mm, 5mm abutment height.
PMUA-NO-5220: Multi Unit 1.4M Angulated Kit 52° - 2mm abutment height.
PMUA-NO-6020: Multi Unit 1.4M Angulated Kit 60° - 2mm abutment height.
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}