No items found.

Classic Cone Implant

DSI Classic implant is distinguished by a straight, slightly conical body. Thanks to the unique design, this implant attains very high stability and has a remarkably larger surface area for increased bone-implant contact. DSI Classic implant is perfect for use in a dense bone and as the anchor implant in multi-unit restorations. Cylindrical implants have been around for many years and it is a classic and reliable product. It enables smaller osteotomy resulting in minimal bone loss and reduces trauma for the patient. It creates a perfectly uniform high-quality platform ready for immediate loading. Platform switching preserves the crestal bone height and soft tissue levels, increasing the quality of outcomes in the treatments.

Inquire Now

The DSI classic line spiral implants prove to be an excellent choice when used in a dense bone and as the main implant in multi-unit restorations. The micro rings on these implants deliver optimal surface area, better load distribution, and reduced crestal stress all at once. Stability is guaranteed by the high level of contact between the bone and the implant.

Product Details

All DSI implants undergo the strictest quality control measures. DSI assures that a high percentage of samples are taken from every batch. Each sample passes a very strict set of tests of cleanliness and conformity. Thus providing minimal rejections afterward. All of the products attend to the highest international standards. All DSI Implants implants are made of titanium alloy Ti-6Al-4V ELI, in accordance with ASTM-F136-02

SLA Surface Treatment:

The classic SLA surface, short of «Sand-blast, Large grit, Acid-etch» is based on large aluminum oxide Al2O3 particles sandblasting technique that generates a macro-roughness on the titanium surface. Sandblasting is followed by an acid-etching batch at high temperatures. As a result, subtle-sized 2-5 micron micropores appear at the implant surface. This unique macro/micro-topography provides an ideal structure for cell attachment while reducing the possibility of bacterial colonization. SLA surface treatment is one of the most used in modern dental implantology. The studies confirmed its strong long-term performance, high mechanical stability, and low odds of developing peri-implantitis. DSI has improved the process, making it hands-free and minimizing the aluminum oxide residuals that may remain on the surface and could significantly impair osseointegration.

Features

• Made of titanium alloy Ti-6Al-4V ELI, in accordance with ASTM-F136-02.
• SLA surface treatment for better osseointegration and reduced bacterial migration.
• Connection: 2.42 Internal Hex, Zimmer-SV compatible.
• Increased implant-abutment contact area.
• A self-tapping implant made with three cutting flutes, designed to engage the bone immediately during placement and ensure multi-directional locking.
• The tapping head cuts into the bone with far less friction due to the relief design of the cutting edge.
• The smooth tri-dome apical part is gentle to anatomical structures.
• Smooth and controlled insertion of implant (according to the recommended drilling protocol) due to straight wall structure.
• Non-aggressive multi-format threads without peri-implant bone condensing effect.
• Micro rings on a coronal part -greatest surface area, better load distribution, and decreased crestal stress.

DFI0835, DFI1035, DFI1135, DFI1335, DFI1635: Ø3.5mm H (8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0638, DFI0838, DFI1038, DFI1138, DFI1338, DFI1638:
Ø3.75mm H (6, 8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0642, DFI0842, DFI1042, DFI1142, DFI1342, DFI1642:
Ø4.2mm H (6, 8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0650, DFI0850, DFI1050, DFI1150, DFI1350, DFI1650:
Ø5.0mm H (6, 8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0660, DFI0860, DFI1060, DFI1160, DFI1360:
Ø6.0mm H (6, 8, 10, 11.5, and 13mm) Classic Cone Implant

More information

Link to product database

Related products

main category
back to top
MADE IN ISRAEL
COPYRIGHT @ 2023 DSI LTD