SP-DSN: Scan-post for internal hex implants narrow platform 2.0mm for narrow implant 3.0mm
SP-DS1: Scan-post for internal hex implants regular platform 2.42mm connection
SP-DST: Titanium Scan-post for internal hex implants regular platform 2.42mm
SP-DSNP: Conical titanium scan body for NP platform 3.5mm conical connection
SP-DSRP: Conical titanium scan body for RP platform 4.3-5.0mm conical connection
SP-DS3: Scanpost for premium multi-unit M1.6
SP-DS2: Scanpost for next-gen multi-unit M1.72
SKU LIST:
SZSA1-NB-NP, SZSA2-NB-NP, SZSA3-NB-NP, SZSA4-NB-NP: Straight conical anatomic zirconia abutment NP platform 3.5mm conical connection
SZSA1-NB-RP, SZSA2-NB-RP, SZSA3-RB-NP, SZSA4-NB-RP: Straight conical anatomic zirconia abutment RP platform 4.3-5.0mm conical connection
SZAA15-NB-NP, SZAA15-2-NB-NP, SZAA15-3-NB-NP: Angulated conical anatomic zirconia abutment 15° NP platform 3.5mm conical connection
SZAA15-NB-RP, SZAA15-2-NB-RP, SZAA15-3-NB-RP: Angulated conical anatomic zirconia abutment 15° RP platform 4.3-5.0mm conical connection
SKU LIST
SD-GBR: Full Kit
SDS-140-060, SDS-140-080, SDS-140-100: screws Ø1.4mm L (6.0, 8.0, 10.0mm)
SDS-160-060, SDS-160-080, SDS-160-100: screws Ø1.6mm L (6.0, 8.0, 10.0mm)
SDB-140-035: purple tack Ø2.5/0.85, L (3.5mm)
SDB-140-050: blue tack Ø2.5/0.85, L (5.0mm)
DH-01: driver handle
TA-01: tack applicator
TH-01: turning handle
SD-PD12, SD-PD14, SD-PD20: GBR pilot drill Ø1.2, 1.4, 2.0mm
TR-01, TR-02, TR-03: drivers L ( 20, 26, 52mm)
NLBC-50: NLBC drill
NLBC-ST5: NLBC stopper
BT-03, BT05: bone tack case (red and blue) for 20 tacks
SPD-T36-022: titanium membrane (pores) Ø0.6mm, size 36.0x22.0mm
SDP-S22-015, SDP-S44-044: titanium membrane (pores) Ø1.4mm, size 22.0x15.0mm, 44.0x44.0mm
MT-414: mallet
SKU LIST
DS-RKS: Full kit
HSD1032: screw remove drill
HST1025: screw remove tap
HSB145B: screw remove bar
HSG22N: screw remove guide sub non-hex 22N
HSG16N: screw remove guide sub non-hex 16N
HSG25H: screw remove guide sub. hex 2.5
HSG22N: screw remove guide sub. hex 2.1
HFR22: fixute remove f 22°
HFR16: fixure remove 16°
HFR16N: fixure remove 16° N
HSD054L: cover screw remove
HRW9785: ratcher wrench
HHSA40: manual adapter
SKU LIST:
DSI-CB-FG7004, DSI-CB-FG7006, DSI-CB-FG7008, DSI-CB-FG7009: FG Round bur Ø1.4, 1.8, 2.3, 2.5mm
DSI-CB-FG7901, DSI-CB-FG7902, DSI-CB-FG7903: FG Needle bur Ø0.9, 1.0, 1.2mm
DSI-CB-FG7104, DSI-CB-FG7106, DSI-CB-FG7108: FG Flame bur Ø1.4, 1.8, 2.3mm
DSI-CB-FG7214: FG Taper trimming bur Ø1.0mm
DSI-CB-FG7404, DSI-CB-FG7406, DSI-CB-FG7408: FG Egg bur Ø1.4, 1.8, 2.3mm
DSI-CB-FG7801, DSI-CB-FG7802, DSI-CB-FG7803: FG Bullet bur Ø1.4, 1.8, 2.3mm
DSI-CB-FG7114: FG Taper short bur Ø0.9mm
DSI-CB-FG7174: FG Flat end taper Ø1.4mm
DSI-CB-FG7204, DSI-CB-FG7206: FG Finishing long taper Ø1.4, 1.8mm
RA7004, RA7005, RA7006, RA7007: FG Round bur Ø1.4, 1.6, 1.8, 2.1mm
SKU LIST:
MUA-NO-10, MUA-NO-20, MUA-NO-30, MUA-NO-40, MUA-NO-50: Straight multi-unit 1.4M
PUD-M14: Abutment position holder
MUA-NO-1720, MUA-NO-1730, MUA-NO-1740, MUA-NO-1750: Angulated multi-unit 17° 1.4M
MUA-NO-3020, MUA-NO-3030, MUA-NO-3040, MUA-NO-3050: Angulated multi-unit 30° 1.4M
MUA-NO-4520, MUA-NO-4530, MUA-NO-4540, MUA-NO-4550: Angulated multi-unit 45° 1.4M
MUA-NO-5220: Angulated multi-unit 52° 1.4M
MUA-NO-6020: Angulated multi-unit 60° 1.4M
SKU LIST:
SSAC-9NP, SSAC-13NP: Straight conical abutment NP platform 3.5mm conical connection
SSAC-9RP, SSAC-13RP: Straight conical abutment RP platform 4.3-5.0mm conical connection
SSAC-1NP, SSAC-2NP, SSAC-3NP: Straight conical shoulder abutment NP platform 3.5mm conical connection
SSAC-1RP, SSAC-2RP, SSAC-3RP: Straight conical shoulder abutment RP platform 4.3-5.0mm conical connection
SKU LIST
SD-MTAC: Full Kit
SDB-140-035: purple tack Ø2.5/0.85, L (3.5mm)
SDB-140-050: blue tack Ø2.5/0.85, L (5.0mm)
TR-01, TR-02: drivers 20, 26mm
MT-414: Mallet
TA-01: tac applicator
SDP-S22-015, SDP-S36-022, SDP-S44-044: titanium membrane (pores) Ø1.4mm, size 22.0x15.0mm, 36.0x22.0mm, 44.0x44.0mm
BT-03, BT05: bone tack case (red and blue) for 20 tacks
SKU LIST:
TB-DS1A, TB-DSH1A, TB-DSH2A, TB-DSH3A, TB-DSH4A: Angulated Hexagonal Ti-Base Abutment Collar Height 0.5, 1.0, 2.0, 3.0 and 4.0mm
TB-DS2A, TB-DSR1A, TB-DSR2A, TB-DSR3A, TB-DSR4A: Angulated Rotational Ti-Base Abutment Collar Height 0.5, 1.0, 2.0, 3.0 and 4.0mm
SISCA1: supplied with 0.5-2mm G/H
SISCA2: supplied with 3mm G/H
SISCA3: supplied with 4mm G/H
DS-MAAD: Special driver for angulated ti-base abutment
SKU LIST
SD-IPD/SD-IPD2: Full kit
S-12, L-12: Ø1.2mm L (23.5 and 30mm) compatible (Biomet 3i / Dentsply Xive / DIO UF / Global D / Hiossen / Keystone Renova, Restore / Megagen / Neo Biotech / Osstem / Tekka)
S-125, L-125: Ø1.25mm L (23.5 and 30mm) compatible (AB-Dent / Adin / Alpha-bio / Anthorgyr / BEGO / Bio Horizon External, Internal / Camlog / Cortex / Dentis / Dentium / Ditron / DSI / Implant Direct / Key Stone (Paltop), Prime Connex / Lasak Bioniq / MIS internal hex / Zimmer)
S-13, L-13: Ø1.3mm L (23.5 and 30mm) compatible (Astratech Ev / DYNA / Kentec / Platon)
S-BM, L-BM: Ø1.7mm L (23.5 and 30mm) compatible (Nobel Active / Branemark / Replace Select etc)
S-SM, L-SM: Ø1.7mm L (23.5 and 30mm) compatible (Straumann)
TH-01: turning handle
R.C CON: wrench condenser
ratchet wrench included only in SD-IPD2 kit
MU-S-LT: long screw for transfer
MU-S-ST: short screw for transfer
MU-S-OT: open tray transfer
MU-S-AN: titanium analog
MU-S-HC: healing cap
MU-S-TS: titanium sleeve abutment
MU-S-SP: castable sleeve abutment
MU-S-PT: snap-on closed transfer
SP-DS2: scan post abutment
TB-DS3: ti-base for multi-unit
MU-BAT: ball attachment connector
MU-S-MX: fixation long screw
MU-S-FX: fixation short screw
MUIH: metal position holder
SKU LIST:
ZB4D-12A1, ZB4D-12A2: Thickness 12.0mm shade A1, A2
ZB4D-14A1, ZB4D-14A2, ZB4D-14A3, ZB4D-14B1: Thickness 14.0mm shade A1, A2, A3, B1
ZB4D-16A1, ZB4D-16A2, ZB4D-16A3, ZB4D-16B1: Thickness 16.0mm shade A1, A2, A3, B1
ZB4D-18A1, ZB4D-18A2, ZB4D-18A3, ZB4D-18B1: Thickness 18.0mm shade A1, A2, A3, B1
ZB4D-20A1, ZB4D-20A2, ZB4D-20A3, ZB4D-20B1: Thickness 20.0mm shade A1, A2, A3, B1
ZB4D-25A1, ZB4D-25A2, ZB4D-25A3, ZB4D-25B1: Thickness 25.0mm shade A1, A2, A3, B1
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}