SD-IPD/SD-IPD2: Full kit
S-12, L-12: Ø1.2mm L (23.5 and 30mm) compatible (Biomet 3i / Dentsply Xive / DIO UF / Global D / Hiossen / Keystone Renova, Restore / Megagen / Neo Biotech / Osstem / Tekka)
S-125, L-125: Ø1.25mm L (23.5 and 30mm) compatible (AB-Dent / Adin / Alpha-bio / Anthorgyr / BEGO / Bio Horizon External, Internal / Camlog / Cortex / Dentis / Dentium / Ditron / DSI / Implant Direct / Key Stone (Paltop), Prime Connex / Lasak Bioniq / MIS internal hex / Zimmer)
S-13, L-13: Ø1.3mm L (23.5 and 30mm) compatible (Astratech Ev / DYNA / Kentec / Platon)
S-BM, L-BM: Ø1.7mm L (23.5 and 30mm) compatible (Nobel Active / Branemark / Replace Select etc)
S-SM, L-SM: Ø1.7mm L (23.5 and 30mm) compatible (Straumann)
TH-01: turning handle
R.C CON: wrench condenser
ratchet wrench included only in SD-IPD2 kit
MUA-NO-10, MUA-NO-20, MUA-NO-30, MUA-NO-40, MUA-NO-50: Straight multi-unit 1.4M
PUD-M14: Abutment position holder
MUA-NO-1720, MUA-NO-1730, MUA-NO-1740, MUA-NO-1750: Angulated multi-unit 17° 1.4M
MUA-NO-3020, MUA-NO-3030, MUA-NO-3040, MUA-NO-3050: Angulated multi-unit 30° 1.4M
MUA-NO-4520, MUA-NO-4530, MUA-NO-4540, MUA-NO-4550: Angulated multi-unit 45° 1.4M
MUA-NO-5220: Angulated multi-unit 52° 1.4M
MUA-NO-6020: Angulated multi-unit 60° 1.4M
SCAA-NP: Angulated conical abutment 15° NP platform 3.5mm conical connection
SCAA25-NP: Angulated conical abutment 25° NP platform 3.5mm conical connection
SCAA-RP: Angulated conical abutment 15° RP platform 4.3-5.0mm conical connection
SCAA25-RP: Angulated conical abutment 25° RP platform 4.3-5.0mm conical connection
TA-NB-NP1515, TA-NB-NP1530, TA-NB-NP1545: Angulated conical anatomic abutment 15° NP platform 3.5mm conical connection
TA-NB-RP1515, TA-NB-RP1530, TA-NB-RP1545: Angulated conical anatomic abutment 15° RP platform 4.3-5.0mm conical connection
TA-NB-NP2515, TA-NB-NP2530, TA-NB-NP2545: Angulated conical anatomic abutment 25° NP platform 3.5mm conical connection
TA-NB-RP2515, TA-NB-RP2530, TA-NB-RP2545: Angulated conical anatomic abutment 25° RP platform 4.3-5.0mm conical connection
SD-GBR: Full Kit
SDS-140-060, SDS-140-080, SDS-140-100: screws Ø1.4mm L (6.0, 8.0, 10.0mm)
SDS-160-060, SDS-160-080, SDS-160-100: screws Ø1.6mm L (6.0, 8.0, 10.0mm)
SDB-140-035: purple tack Ø2.5/0.85, L (3.5mm)
SDB-140-050: blue tack Ø2.5/0.85, L (5.0mm)
DH-01: driver handle
TA-01: tack applicator
TH-01: turning handle
SD-PD12, SD-PD14, SD-PD20: GBR pilot drill Ø1.2, 1.4, 2.0mm
TR-01, TR-02, TR-03: drivers L ( 20, 26, 52mm)
NLBC-50: NLBC drill
NLBC-ST5: NLBC stopper
BT-03, BT05: bone tack case (red and blue) for 20 tacks
SPD-T36-022: titanium membrane (pores) Ø0.6mm, size 36.0x22.0mm
SDP-S22-015, SDP-S44-044: titanium membrane (pores) Ø1.4mm, size 22.0x15.0mm, 44.0x44.0mm
MT-414: mallet
SK003: DSI full surgical kit
LD150: lance drill Ø1.5mm
PD190: pilot drill Ø1.9mm
PD200, TD280, TD320, TD365, TD400, TD420, TD450, TD520: Cylindrical drills Ø 2.0, 2.8, 3.2, 3.65,4.0,4.2, 4.5 and 5.2mm
CD375, CD500: Countersink drills Ø3.75-4.2mm, Ø5.0-6.0mm
TDE: drill extender
RDS2010, RDS2015: ratchet driver Ø2.00mm, L (10mm, 15mm) for narrow implant Ø3.00mm
RDK24100, RDK24150: ratchet driver Ø2.42mm, L (10mm, 15mm) for implants
RDK125100, RDK125150: ratchet driver Ø1.25mm, L (10mm, 15mm) for abutments
HDK125100, HDK125150: hand abutment driver Ø1.25mm L (10mm, 15mm)
SPP100, SPP160: Jag parallel guide pins - L10,16mm
MM12520, MM12528: motor mount hex driver Ø1.25mm, L(20, 28mm) for abutments
MM24220, MM24028: motor mount hex driver Ø2.42mm, L(20, 28mm) for implants
SR: wrench ratchet 6.35 hexagonal head
1000201: torque ratchet - torque 10-35 Ncm
DPKOP: depth gauge measuring tool
PAL94150: removable stainless surgical tray
LI-SP10, LI-SP20, LI-SP30, LI-SP40, LI-SP50, LI-SP60: Loc-In attachment *Narrow*
LI-RP05, LI-RP10, LI-RP20, LI-RP30, LI-RP40, LI-RP50, LI-RP60: Loc-In attachment *Regular*
PLI-SP10, PLI-SP20, PLI-SP30, PLI-SP40, PLI-SP50, PLI-SP60: Loc-In Attachment kit *Narrow*
PLI-RP05, PLI-RP10, PLI-RP20, PLI-RP30, PLI-RP40, PLI-RP50, PLI-RP60: Loc-In attachment kit *Regular*
PABAT-1810, PABAT-1820, PABAT-1830: Angulated ball attachment *full kit 18° *Regular*
PABAT-3010, PABAT-3020, PABAT-3030: Angulated ball attachment *full kit 30° *Regular*
PABAT-4010, PABAT-4020, PABAT-4030: Angulated ball attachment *full kit 40° *Regular*
BABAT-1810, BABAT-1820, BABAT-1830: Angulated ball attachment *basic kit 18° *Regular*
BABAT-3010, BABAT-3020, BABAT-3030: Angulated ball attachment *basic kit 30° *Regular*
BABAT-4010, BABAT-4020, BABAT-4030: Angulated ball attachment *basic kit 40° *Regular*
PSBA05, PSBA10, PSBA20, PSBA30, PSBA40, PSBA50, PSBA60, PSBA70: Straight ball attachment *full kit *Regular*
PSBA10S, PSBA20S, PSBA30S, PSBA40S, PSBA50S, PSBA60S: Straight ball attachment *full kit *Narrow*
SBA370: Analog for ball attachment
BAT-PU: Transfer for ball attachment
MU-BAT: Connector for Next-Gen multi-unit
008MDS: Sphere diameter measuring tool
485IC: Insertion and extraction tool for silicone caps
SACC-NP, NACC-NP: Conical castable abutment hexagonal/rotational NP platform 3.5mm conical connection
SACC-RP, NACC-RP: Conical castable abutment hexagonal/rotational RP platform 4.3-5.0mm conical connection
CAMC-NP, NAMC-NP: Conical Chrome-cobalt base abutment hexagonal/rotational NP platform 3.5mm conical connection
CAMC-RP, NAMC-RP: Conical Chrome-cobalt base abutment hexagonal/rotational RP platform 4.3-5.0mm conical connection
ZGR33160: Bone Ring 3.0-3.5 mm Ø 6.0 /H 10.0mm,1 pcs in vial
ZGR33170: Bone Ring 3.3-3.75 mm Ø7.0 /H 10.0mm, 1 pcs in vial
ZGR33174: Bone Ring 4.0-4.5 mm Ø7.0 /H 10.0mm, 1 pcs in vial
BRH: Bone Ring Holder
SDTRBG-08: Trephine Bur 8.0mm with Guide
SDTRBG-07: Trephine Bur 7.0mm with Guide
PTR-70: Special Reamer for Bone Ring
SCI0835, SCI1035, SCI1135, SCI1335, SCI1635: Ø3.5mm H (8, 10, 11.5, 13 and 16mm) NP platform
SCI0843, SCI1043, SCI1143, SCI1343, SCI1643: Ø4.3mm H (8, 10, 11.5, 13 and 16mm) RP platform
SCI0650, SCI0850, SCI1050, SCI1150, SCI1350, SCI1650: Ø5.0mm H (6, 8, 10, 11.5, 13 and 16mm) RP platform
SD-FSR: Full kit
FRD-01: 2x implant remover screw Ø1.6/1.8mm
FRD-02: 2x implant remover screw Ø2.0/2.5mm
FRD-03: implant remover screw Narrow
RE-02: ratchet extension
SDADP-01: handpiece condencer
SDWRH-02: long wrench
TH-03: turning handle
GH-01: guide holder
TH-01: turning handle
D-REM08: remove drill Ø0.8mm L 32.5mm
D-REM13: remove drill Ø1.3mm L 32.5mm
D-RED08: reverse drill Ø0.8mm L 30mm
D-RED13: reverse drill Ø1.3mm L 30mm
TD-08: tap drill Ø0.8mm L 30mm
TD-13: tap drill Ø1.3mm L 30mm
FTD-01: flat tip driver Ø2.5mm L 26mm
G-EM: external mini
G-ER external regular
G-OI: octa internal
G-HS: hex submerged
G-TSV: TSV 3.7/4.1
G-TRI: tri-lobe
G-SN: submerged narrow
TB-DSC1-NP, TB-DSCR-NP: Conical ti-base abutment hexagonal/rotational NP platform 3.5mm conical connection
TB-DSC1-RP, TB-DSCR-RP: Conical ti-base abutment hexagonal/rotational RP platform 4.3-5.0mm conical connection
SP-DSNP: Conical titanium scan body NP platform 3.5mm conical connection
SP-DSRP: Conical titanium scan body RP platform 4.3-5.0mm conical connection
SIA-3D-NP: Conical analog NP platform 3.5mm conical connection
SIA-3D-RP: Conical analog RP platform 4.3-5.0mm conical connection
AFGOLD-19SX: shaping files SX - 19mm
AFGOLD-21S1, AFGOLD-25S1: shaping files S1 - 21, 25mm
AFGOLD-21S2, AFGOLD-25S2: shaping files S2 - 21, 25mm
AFGOLD-21F1, AFGOLD-25F1: finishing files F1 - 21, 25mm
AFGOLD-21F2, AFGOLD-25F2: finishing files F2 - 21, 25mm
AFGOLD-21F3, AFGOLD-25F3: finishing files F3 - 21, 25mm
AFGOLD21SX-F3, AFGOLD25SX-F3, AFGOLD31SX-F3: assorted files of SX, S1, S2, F1, F2, F3 - 21, 25 and 31mm
SHCA2, SHCA3, SHCA4, SHCA5, SHCA6, SHCA7: Healing cap
SAAC1, SAAC2, SAAC3, SAAC4: Straight abutment
SAAC15-1, SAAC15-2, SAAC15-3, SAAC15-4: Angulated abutment 15°
SAAC25-1, SAAC25-2, SAAC25-3, SAAC25-4: Angulated abutment 25°
PCT1, PCT2, PCT3, PCT4: Snap-on transfer
SNAP-SC: Plastic Cap
SISC: Fixation Screw
UPK-C1, UPK-C2, UPK-C3, UPK-C4: Kit includes analog, transfer, healing cap, straight abutment, and 2 fixation screws.
SD-CL: Full kit
SD-GD20: guide drill Ø2.0mm
SD-RM28, SD-RM33, SD-RM37: SD- Reamer Ø2.8, 3.3, 3.7mm
SDST-03, SDST-04, SDST-05, SDST-06, SDST-07, SDST-08: crestal stopper L (3, 4, 5, 6, 7, 8mm)
LAST-01, LAST-10, LAST-15, LAST-20, LAST-25: lateral stopper L (0.5, 1.0, 1.5, 2.0, 2.5mm)
SDWRH-00: ratchet wrench
LASC-70: lateral side cutter Ø7.0mm
LACD-80: lateral core drill Ø8.0mm
LASR-80: lateral sinus reamer Ø8.0mm
CLS30, CLS35: crestal aqua tip Ø3.0, 3.5mm
SDADP-02: handpiece condenser
R.C EXT: ratchet extension
TOLA2-01, TOLA2-02, TOLA2-03: curette
MP-BP: bone packer
STB: silicone tube
SK001R, SK001M: Full Kit - DSI MCB/ROOT comes in two options (SK001M and SM001R) and can be used either for MCB or for ROOT implant socket preparation. LD20L13, LD25L13, LD28L13, LD32L13: Short lance drills Ø2.0, 2.5, 2.8, 3.2mm SHORT L 13mm
LD20L16, LD25L16, LD28L16, LD32L16: Long lance drills Ø2.0, 2.5, 2.8, 3.2mm LONG L 16mm
SR: Ratchet
MMRA: Motor mount to ratchet adapter
RDOP: Ratchet driver for MC/MCB implat (included only in SK001M)
RDMCB: Ratchet driver for MCB bend (included only in SK001M)
OPD: Driver for root shape implant (included only in SM001R)
SD-SCRM: Full Kit
SDS-140-030, SDS-140-040, SDS-140-060: screws Ø1.4mm L (3.0, 4.0, 6.0mm)
SDS-160-080, SDS-160-100, SDS-160-120: screws Ø1.6mm L (8.0, 10.0, 12.0mm)
SDP-S22-015: titanium membrane (pores) Ø1.4mm, size 22.0x15.0mm
TR-01: short driver 20mm
TR-03: extra long driver 52mm
DH-01: driver handle