SKU LIST:
SHCA2, SHCA3, SHCA4, SHCA5, SHCA6, SHCA7: Healing cap
SAAC1, SAAC2, SAAC3, SAAC4: Straight abutment
SAAC15-1, SAAC15-2, SAAC15-3, SAAC15-4: Angulated abutment 15°
SAAC25-1, SAAC25-2, SAAC25-3, SAAC25-4: Angulated abutment 25°
PCT1, PCT2, PCT3, PCT4: Snap-on transfer
SNAP-SC: Plastic Cap
SISC: Fixation Screw
UPK-C1, UPK-C2, UPK-C3, UPK-C4: Kit includes analog, transfer, healing cap, straight abutment, and 2 fixation screws.
S-12, L-12: Ø1.2mm L (23.5 and 30mm) compatible (Biomet 3i / Dentsply Xive / DIO UF / Global D / Hiossen / Keystone Renova, Restore / Megagen / Neo Biotech / Osstem / Tekka)
S-125, L-125: Ø1.25mm L (23.5 and 30mm) compatible (AB-Dent / Adin / Alpha-bio / Anthorgyr / BEGO / Bio Horizon External, Internal / Camlog / Cortex / Dentis / Dentium / Ditron / DSI / Implant Direct / Key Stone (Paltop), Prime Connex / Lasak Bioniq / MIS internal hex / Zimmer)
S-13, L-13: Ø1.3mm L (23.5 and 30mm) compatible (Astratech Ev / DYNA / Kentec / Platon)
S-BM, L-BM: Ø1.7mm L (23.5 and 30mm) compatible (Nobel Active / Branemark / Replace Select etc)
S-SM, L-SM: Ø1.7mm L (23.5 and 30mm) compatible (Straumann)
RDTK100, RDTK150: torx ratchet driver for prosthetics Ø1.25mm L 10, 15mm
MMTK200, MMTK350: torx motor mount driver Ø1.25mm L 20, 35mm
SDS-140-030, SDS-140-040, SDS-140-060, SDS-140-080, SDS-140-100, SDS-140-120: GBR fixation screws Ø1.4mm L (3, 4, 6, 8, 10, 12mm)
SDS-160-030, SDS-160-040, SDS-160-060, SDS-160-080, SDS-160-100, SDS-160-120: GBR fixation screws Ø1.6mm L (3, 4, 6, 8, 10, 12mm)
SDS-200-030, SDS-200-040, SDS-200-060, SDS-200-080, SDS-200-100, SDS-200-120: GBR fixation screws Ø1.4mm L (3, 4, 6, 8, 10, 12mm)
DH-01: driver handle
TH-01: turning handle
TR-01, TR-02, TR-03: gbr drivers, L 20, 26, 52mm
SD-PD12, SD-PD14, SD-PD20: gbr pilot drills Ø1.2, 1.4, 2.0mm
SKU LIST:
PMU-S-NP-10, PMU-S-NP-20, PMU-S-NP-30, PMU-S-NP-40: Straight abutment kit *Narrow*
PMU-S-RP-10, PMU-S-RP-20, PMU-S-RP-30, PMU-S-RP-40: Straight abutment kit *Regular*
PMU-A17-NP-10, PMU-A17-NP-20: Angulated abutment kit 17° *Narrow*
PMU-A30-NP-10, PMU-A30-NP-20: Angulated abutment kit 30° *Narrow*
PMU-A17-RP-10, PMU-A17-RP-20: Angulated abutment kit 17° *Regular*
PMU-A30-RP-10, PMU-A30-RP-20: Angulated abutment kit 30° *Regular*
PMU-A45-RP-20: Angulated abutment kit 45° *Regular*
SKU LIST:
PMUA-NO10, PMUA-NO20, PMUA-NO30, PMUA-NO40, PMUA-NO50: Multi Unit 1.4M Straight Kit 1mm, 2mm, 3mm, 4mm, 5mm abutment height.
PMUA-NO-1720, PMUA-NO-1730, PMUA-NO-1740, PMUA-NO-1750: Multi Unit 1.4M Angulated Kit 17° - 2mm, 3mm, 4mm, 5mm abutment height.
PMUA-NO-3020, PMUA-NO-3030, PMUA-NO-3040, PMUA-NO-3050: Multi Unit 1.4M Angulated Kit 30° - 2mm, 3mm, 4mm, 5mm abutment height.
PMUA-NO-4520, PMUA-NO-4530, PMUA-NO-4540, PMUA-NO-4550: Multi Unit 1.4M Angulated Kit 45° - 2mm, 3mm, 4mm, 5mm abutment height.
PMUA-NO-5220: Multi Unit 1.4M Angulated Kit 52° - 2mm abutment height.
PMUA-NO-6020: Multi Unit 1.4M Angulated Kit 60° - 2mm abutment height.
SKU LIST
DSI-KINUS: Full kit
CR28, CR33, CR38: crestal reamer Ø2.8, 3.3, 3.8mm
GD20: guide drill Ø2.0mm
LD65: lateral drill Ø6.5mm
SC2550: side cutter Ø2.4mm
STD02, STD03, STD04, STD05, STD06, STD07: stopper L (2, 3, 4, 5, 6, 7mm)
WD65-10, WD65-20, WD65-30: window drill Ø1.0, 2.0, 3.0mm
HNCR-1: sinus curette L 170mm
HNCR-2: sinus curette L 160mm
HNCR-3: sinus curette L 155mm
HNCR-4: sinus curette L 160mm
DG0246: bone condenser / depth gauge
BCCAS: bone carrier (crestal approach)
BC0511: bone carrier (lateral approach)
AT3050: aqua tip
STB: silicone tube
SKU LIST
SD-SCR: Full Kit
SDS-140-060, SDS-140-080, SDS-140-100: screws Ø1.4mm L (6.0, 8.0, 10.0mm)
SDS-160-060, SDS-160-080, SDS-160-100: screws Ø1.6mm L (6.0, 8.0, 10.0mm)
SD-PD12, SD-PD14, SD-PD20: GBR pilot drill Ø1.2, 1.4, 2.0mm
SDP-S36-022: titanium membrane (pores) Ø1.4mm, size 36.0x22.0mm
TR-01, TR-02, TR-03: drivers L ( 20, 26, 52mm)
DH-01: driver handle
TH-01: turning handle
SKU LIST:
HNCPK-100: DSI Crestal Pro Full
SRD28, SRD31, SRD33, SRD36, SRD38, SRD41: sinus R drill Ø2.8, 3.1, 3.3, 3.6, 3.8, 4.1mm
ATDA: dual action aqua tip
PD20: point drill
GD20: guide drill Ø2.0mm
AT3050: elevation aqua tip
BCCAS: bone carrier
DG315: bone pusher/depth gauge
STP02, STP03.STP04. STP05, STP06, STP07, STP08, STP09, STP10: stoppers L (2, 3, 4, 5, 6, 7, 8, 9, 10)
SKU LIST
SD-FSR: Full kit
FRD-01: 2x implant remover screw Ø1.6/1.8mm
FRD-02: 2x implant remover screw Ø2.0/2.5mm
FRD-03: implant remover screw Narrow
RE-02: ratchet extension
SDADP-01: handpiece condencer
SDWRH-02: long wrench
TH-03: turning handle
GH-01: guide holder
TH-01: turning handle
D-REM08: remove drill Ø0.8mm L 32.5mm
D-REM13: remove drill Ø1.3mm L 32.5mm
D-RED08: reverse drill Ø0.8mm L 30mm
D-RED13: reverse drill Ø1.3mm L 30mm
TD-08: tap drill Ø0.8mm L 30mm
TD-13: tap drill Ø1.3mm L 30mm
FTD-01: flat tip driver Ø2.5mm L 26mm
G-EM: external mini
G-ER: external regular
G-OI: octa internal
G-HS: hex submerged
G-TSV: TSV 3.7/4.1
G-TRI: tri-lobe
G-SN: submerged narrow
SKU LIST:
IPR-SH-24: Proxicut set - includes 1 holder, 24x blades and 24x strips
IPR-PS: 1 Strip Holder, 1 Key, 1 Long Handle and 12 of each Proxistrip Saw Blades, Diamond Strips Coarse, Medium and Fine
IPR-ST: 12 Proxicut saws
IRP-ASC: 12 Proxicut strips
IPR-ST2: 12 Proxistrip saws
IRP-ASC2: 12 Proxistrip strips coarse
IRP-ASM2: 12 Proxistrip strips medium
IRP-ASF2: 12 Proxistrip strips fine
SKU LIST:
GD200L6, GD200L8, GD200L10, GD200L115, GD200L13: guided drill Ø2.0mm L (6.0, 8.0, 10.0, 11.5, 13.0mm)
GD280L6, GD280L8, GD280L10, GD280L115, GD280L13: guided drill Ø2.8mm L (6.0, 8.0, 10.0, 11.5, 13.0mm)
GD320L6, GD320L8, GD320L10, GD320L115, GD320L13: guided drill Ø3.2mm L (6.0, 8.0, 10.0, 11.5, 13.0mm)
GD365L6, GD365L8, GD365L10, GD365L115, GD365L13: guided drill Ø3.65mm L (6.0, 8.0, 10.0, 11.5, 13.0mm)
G43SLV: surgical guide sleeve
SKU LIST:
DFI0835, DFI1035, DFI1135, DFI1335, DFI1635: Ø3.5mm H (8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0638, DFI0838, DFI1038, DFI1138, DFI1338, DFI1638: Ø3.75mm H (6, 8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0642, DFI0842, DFI1042, DFI1142, DFI1342, DFI1642: Ø4.2mm H (6, 8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0650, DFI0850, DFI1050, DFI1150, DFI1350, DFI1650: Ø5.0mm H (6, 8, 10, 11.5, 13 and 16mm) Classic Cone Implant
DFI0660, DFI0860, DFI1060, DFI1160, DFI1360: Ø6.0mm H (6, 8, 10, 11.5, and 13mm) Classic Cone Implant
SKU LIST
SD-CL: Full kit
SD-GD20: guide drill Ø2.0mm
SD-RM28, SD-RM33, SD-RM37: SD- Reamer Ø2.8, 3.3, 3.7mm
SDST-03, SDST-04, SDST-05, SDST-06, SDST-07, SDST-08: crestal stopper L (3, 4, 5, 6, 7, 8mm)
LAST-01, LAST-10, LAST-15, LAST-20, LAST-25: lateral stopper L (0.5, 1.0, 1.5, 2.0, 2.5mm)
SDWRH-00: ratchet wrench
LASC-70: lateral side cutter Ø7.0mm
LACD-80: lateral core drill Ø8.0mm
LASR-80: lateral sinus reamer Ø8.0mm
CLS30, CLS35: crestal aqua tip Ø3.0, 3.5mm
SDADP-02: handpiece condenser
R.C EXT: ratchet extension
TOLA2-01, TOLA2-02, TOLA2-03: curette
MP-BP: bone packer
STB: silicone tube
SKU LIST
SK001R, SK001M: Full Kit - DSI MCB/ROOT comes in two options (SK001M and SM001R) and can be used either for MCB or for ROOT implant socket preparation.
LD20L13, LD25L13, LD28L13, LD32L13: Short lance drills Ø2.0, 2.5, 2.8, 3.2mm SHORT L 13mm
LD20L16, LD25L16, LD28L16, LD32L16: Long lance drills Ø2.0, 2.5, 2.8, 3.2mm LONG L 16mm
SR: Ratchet
MMRA: Motor mount to ratchet adapter
RDOP: Ratchet driver for MC/MCB implat (included only in SK001M)
RDMCB: Ratchet driver for MCB bend (included only in SK001M)
OPD: Driver for root shape implant (included only in SM001R)
SKU LIST:
SCI0835, SCI1035, SCI1135, SCI1335, SCI1635: Ø3.5mm H (8, 10, 11.5, 13 and 16mm) NP platform
SCI0843, SCI1043, SCI1143, SCI1343, SCI1643: Ø4.3mm H (8, 10, 11.5, 13 and 16mm) RP platform
SCI0650, SCI0850, SCI1050, SCI1150, SCI1350, SCI1650: Ø5.0mm H (6, 8, 10, 11.5, 13 and 16mm) RP platform
SKU LIST:
DSI-CB-FG7004, DSI-CB-FG7006, DSI-CB-FG7008, DSI-CB-FG7009: FG Round bur Ø1.4, 1.8, 2.3, 2.5mm
DSI-CB-FG7901, DSI-CB-FG7902, DSI-CB-FG7903: FG Needle bur Ø0.9, 1.0, 1.2mm
DSI-CB-FG7104, DSI-CB-FG7106, DSI-CB-FG7108: FG Flame bur Ø1.4, 1.8, 2.3mm
DSI-CB-FG7214: FG Taper trimming bur Ø1.0mm
DSI-CB-FG7404, DSI-CB-FG7406, DSI-CB-FG7408: FG Egg bur Ø1.4, 1.8, 2.3mm
DSI-CB-FG7801, DSI-CB-FG7802, DSI-CB-FG7803: FG Bullet bur Ø1.4, 1.8, 2.3mm
DSI-CB-FG7114: FG Taper short bur Ø0.9mm
DSI-CB-FG7174: FG Flat end taper Ø1.4mm
DSI-CB-FG7204, DSI-CB-FG7206: FG Finishing long taper Ø1.4, 1.8mm
RA7004, RA7005, RA7006, RA7007: FG Round bur Ø1.4, 1.6, 1.8, 2.1mm
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}