SKU LIST:
TB-DS1A, TB-DSH1A, TB-DSH2A, TB-DSH3A, TB-DSH4A: Angulated Hexagonal Ti-Base Abutment Collar Height 0.5, 1.0, 2.0, 3.0 and 4.0mm
TB-DS2A, TB-DSR1A, TB-DSR2A, TB-DSR3A, TB-DSR4A: Angulated Rotational Ti-Base Abutment Collar Height 0.5, 1.0, 2.0, 3.0 and 4.0mm
SISCA1: supplied with 0.5-2mm G/H
SISCA2: supplied with 3mm G/H
SISCA3: supplied with 4mm G/H
DS-MAAD: Special driver for angulated ti-base abutment
SKU LIST:
PD200, TD250, TD280, TD320, TD365, TD400, TD420, TD450, TD520: cylindrical drills Ø2.0, 2.5, 2.8m 3.2, 3.65, 4.0, 4.2, 4.5, 5.2mm
DNP200, DNT250, DNT280, DNT320, DNT365, DNT400, DNT450, DNT520: cylindrical drills DNT coating Ø2.0, 2.5, 2.8m 3.2, 3.65, 4.0, 4.2, 4.5, 5.2mm
MU-S-LT: long screw for transfer
MU-S-ST: short screw for transfer
MU-S-OT: open tray transfer
MU-S-AN: titanium analog
MU-S-HC: healing cap
MU-S-TS: titanium sleeve abutment
MU-S-SP: castable sleeve abutment
MU-S-PT: snap-on closed transfer
SP-DS2: scan post abutment
TB-DS3: ti-base for multi-unit
MU-BAT: ball attachment connector
MU-S-MX: fixation long screw
MU-S-FX: fixation short screw
MUIH: metal position holder
ECDS-M17: Direct connection for MUA
SD-FSRC: Full kit
FRD-01: 2x implant remover screw Ø1.6/1.8mm
FRD-02: 2x implant remover screw Ø2.0/2.5mm
D-REM08: remove drill Ø0.8mm L 32.5mm
D-RED08: reverse drill Ø0.8mm L 30mm
TD-08: tap drill Ø0.8mm L 30mm
TH-03: turning handle
FTD-01: flat tip driver Ø2.5mm L 26mm
G-HS: hex submerged
G-TSV: TSV 3.7/4.1
G-TRI: tri-lobe
G-SN: submerged narrow
GH-01: guide holder
SDWRH-02: long wrench
SKU LIST
SD-BMS: Full kit
SDEXP-01, SDEXP-02, SDEXP-03, SDEXP-04, SDEXP-05: expander drill Ø1.8/2.5, 2.0/3.0, 2.5/3.5, 2.8/4.0, 3.0/4.5mm
SDADP-01: handpiece condenser
SDGDL-02: guide drill
SDSAW-07, SDSAW-09: saw disk Ø7.0, 9.0mm
WA-01: wrench adapter
SA-01: spreading adapter
SP-01: spreading pin
CT-50: contouring bur Ø5.0mm
NLBC-50: NLBC drill Ø5.0mm
NLBC-ST5: stopper for NLBC drill
SDWRH-00: ratchet wrench
SCL-05: curved chisel
SKU LIST:
SSFTMU-K: transfer screw
STFMU-K: open tray transfer
SAFMU-K: titanium analog
SHCFMU-K: healing cap
SSTFMU-K: titanium sleeve abutment
SSPFMU-K: castable sleeve abutment
STFMU-KC: snap-on closed transfer
SP-DS3: scan post abutment
TB-DS4: ti-base for multi-unit
SAFMU-3D: 3D printing analog for MUA
LSFMU-K: fixation long screws
SSFMU-K: fixation short screws
MUD-M1.6: metal position holder
ECDS-M16: Direct connection for MUA
SKU LIST
STOP-30: DSI Integral Stopper Drills Kit
PD200L6S, PD200L8S, PD200L10S, PD200L115S, PD200L13S: Stopper drills Ø2.0mm L (6, 8, 10, 11.5, 13mm)
TD280L6S, TD280L8S, TD280L10S, TD280L115S, TD280L13S: Stopper drills Ø2.8mm L (6, 8, 10, 11.5, 13mm)
TD320L6S, TD320L8S, TD320L10S, TD320L115S, TD320L13S: Stopper drills Ø3.2mm L (6, 8, 10, 11.5, 13mm)
TD365L6S, TD365L8S, TD365L10S, TD365L115S, TD365L13S: Stopper drills Ø3.65mm L (6, 8, 10, 11.5, 13mm)
TD400L6S, TD400L8S, TD400L10S, TD400L115S, TD400L13S: Ø4.0mm L (6, 8, 10, 11.5, 13mm)
TD450L6S, TD450L8S, TD450L10S, TD450L115S, TD450L13S: Ø4.5mm L (6, 8, 10, 11.5, 13mm)
SKU LIST:
ULF-A1: DSI UniLite Flow ,2 syringes 2g each, Shade A1
ULF-A2: DSI UniLite Flow ,2 syringes 2g each, Shade A2
ULF-A3: DSI UniLite Flow ,2 syringes 2g each, Shade A3
ULF-A35: DSI UniLite Flow ,2 syringes 2g each, Shade A3.5
ULF-B1: DSI UniLite Flow ,2 syringes 2g each, Shade B1
ULF-B2: DSI UniLite Flow ,2 syringes 2g each, Shade B2
ULF-C2: DSI UniLite Flow ,2 syringes 2g each, Shade C2
ULF-O: DSI UniLite Flow ,2 syringes 2g each, Opaque A2
SD-TQ: torque wrench manual ratchet (2 drivers included) Ø1.25mm, L 23.5, 30mm
SR: regular ratchet wrench Ø6.35mm
SDWRH-03: torque wrench ratchet 15–35 Ncm, 4.0 square interface
1000201, 1000202: torque ratchet Ø6.35mm (torque 10-35, 10-45Ncm)
RS6111: torque ratchet Ø6.35mm torque 25-100Ncm
SKU LIST
DK28RD: DSI DLC Step&Stop drills KitTD280L6SC, SD2028L8SC, SD2028L10SC, SD2028L115SC, SD2028L13SC: DLC Step&Stop Drill Ø2.0-2.8mm L (6, 8, 10, 11.5, 13mm)
TD320L6SC, SD2832L8SC, SD2832L10SC, SD2832L115SC, SD2832L13SC: DLC Step&Stop Drill Ø2.8-3.2mm L (6, 8, 10, 11.5, 13mm)
TD365L6SC, SD32365L8SC, SD32365L10SC, SD32365L115SC, SD32365L13SC: DLC Step&Stop Drill Ø3.2-3.65mm L (6, 8, 10, 11.5, 13mm)
TD400L6SC, SD36540L8SC, SD36540L10SC, SD36540L115SC, SD36540L13SC: DLC Step&Stop Drill Ø3.65-4.0mm L (6, 8, 10, 11.5, 13mm)
TD450L6SC, SD4045L8SC, SD4045L10SC, SD4045L115SC, SD4045L13SC: DLC Step&Stop Drill Ø4.0-4.5mm L (6, 8, 10, 11.5, 13mm)
PD200L6SC: Pilot drill Ø2.0mm
RB23: Round Bur Ø2.3mm
TDE: drill extender
SKU LIST:
SPI0835, SPI1035, SPI1135, SPI1335, SPI1635: Ø3.5mm H (8, 10, 11.5, 13 and 16mm) SLA premium green line spiral implant
SPI0638, SPI0838, SPI1038, SPI1138, SPI1338, SPI1638: Ø3.75mm H (6, 8, 10, 11.5, 13 and 16mm) SLA premium green line spiral implant
SPI0642, SPI0842, SPI1042, SPI1142, SPI1342, SPI1642: Ø4.2mm H (6, 8, 10, 11.5, 13 and 16mm) SLA premium green line spiral implant
SPI0650, SPI0850, SPI1050, SPI1150, SPI1350, SPI1650: Ø5.0mm H (6, 8, 10, 11.5, 13 and 16mm) SLA premium green line spiral implant
SPI0660, SPI0860, SPI1060, SPI1160, SPI1360: Ø6.0mm H (6, 8, 10, 11.5, and 13mm) SLA premium green line spiral implant
SRI0835, SRI1035, SRI1135, SRI1335, SRI1635: Ø3.5mm H (8, 10, 11.5, 13 and 16mm) RBM premium green line spiral implant
SRI0638, SRI0838, SRI1038, SRI1138, SRI1338, SRI1638: Ø3.75mm H (6, 8, 10, 11.5, 13 and 16mm) RBM premium green line spiral implant
SRI0642, SRI0842, SRI1042, SRI1142, SRI1342, SRI1642: Ø4.2mm H (6, 8, 10, 11.5, 13 and 16mm) RBM premium green line spiral implant
SRI0650, SRI0850, SRI1050, SRI1150, SRI1350, SRI1650: Ø5.0mm H (6, 8, 10, 11.5, 13 and 16mm) RBM premium green line spiral implant
SKU LIST:
SAAC15-1, SAAC15-2, SAAC15-3, SAAC15-4: Angulated concave abutment 15° *Regular*
SAAC25-1, SAAC25-2, SAAC25-3, SAAC25-4: Angulated concave abutment 25° *Regular*
STAA15-S: Angulated abutment 15° *Narrow*
STAA15-7: Angulated abutment 15° 7mm height *Regular*
STAA15, STAA15L: Angulated abutment 15° 9 and 11mm height *Regular*
STAA25, STAA25L: Angulated abutment 25° 9 and 11mm height *Regular*
STAA35: Angulated abutment 35° *Regular*
STAA45: Angulated abutment 45° *Regular*
STAA15-1, STAA15-2, STAA15-3, STAA15-4: Angulated anatomic abutment 15° *Regular*
STAA25-1, STAA25-2, STAA25-3, STAA25-4: Angulated anatomic abutment 25° *Regular*
STAA15W-1, STAA15W-2, STAA15W-3: Angulated anatomic abutment 15° *Regular*
SKU LIST
IDS-55250 - Penguin II device
The Penguin II device uses specialized plugs designed to measure implant stability and osseointegration level. These plugs emit magnetic resonance and capture the returning frequency, translating it into precise ISQ levels. Exclusively designed for use with the Penguin device, these plugs are compatible with different platforms (each plug for a different platform, for selection). Crafted from top-quality materials, they are reusable and capable of enduring up to 20 sterilizations in an autoclave.
Plugs List -
IDS-55014 - Straumann tissue level, regular & wide neck
IDS-55020 - Adin touareg close fit WP 4.3,5.0
IDS-55021 - AB Dental narrow platform (NP)
IDS-55027 - MIS narrow / Straumann BLX
IDS-55034 - For Israeli internal hexagon systems (DSI)
IDS-55033 - MIS multi-unit system
IDS-55037 - Alfa Gate M+ RP 4.3 - 5.0
IDS-55041 - MIS Conical connection wide (C1)
IDS-55044 - Alfa Gate M+ NP 3.5
IDS-55049 - MIS Seven Standard / AB Internal Hex (SP)
IDS-55051 - AlphaBio/MIS/Tag for wide inner hexagon systems
IDS-55059 - Adin/Alfa Gate for narrow cone systems
IDS-55061 - Straumann bone level tapered narrow (NC)
IDS-55062 - Straumann bone level tapered regular (RC)
IDS-55064 - Straumann bone level tapered SC 2.9
IDS-55065 - Alpha-Bio conical hex 3.2
IDS-55066 - Paltop PCA conical
IDS-55076 - Straumann tissue level, narrow neck crossfit (NNC)
IDS-55081 - MIS conical connection narrow (C1, V3)
IDS-55087 - MIS conical standard C1,V3 / Ditron Ultimate/MPI
IDS-55115 - Straumann tissue level X (TLX) / MIS connect
IDS-55003 - Driver for plugs
SKU LIST
SK004: DSI All-in-one surgical kit
MM24220, MM24028: motor mount hex driver Ø2.42mm, L(20, 28mm) for implants
RDK24070, RDK24150: ratchet driver Ø2.42mm, L (7mm, 15mm) for implants
RDK125100: ratchet driver Ø1.25mm, L (10mm) for abutments
HDK125150: hand abutment driver Ø1.25mm L (15mm)
PD190: pilot drill Ø1.9mm
PD200, TD250, TD280, TD320, TD365, TD450, TD520: Cylindrical drills Ø 2.0, 2.5, 2.8, 3.2, 3.65, 4.5 and 5.2mm
TDC370, TDC400: Conical Drills Ø2.5-3.7mm, 2.7-4.0mm
CD375, CD500: Countersink drills Ø3.75-4.2mm, Ø5.0-6.0mm
TDE: drill extender
SPP100, SPP160: Jag parallel guide pins - L (10,16mm)
SR: wrench ratchet 6.35 hexagonal head
DPKOP: depth gauge measuring tool
SKU LIST:
MC1024, MC1124, MC1324: ØD -2.4mm, ØD1 - 1.7mm, L(10, 11.5, 13mm) Compressive implant short neck
MC1028, MC1128, MC1328, MC1628: ØD -2.8mm, ØD1 - 1.8mm, L(10, 11.5, 13, 16mm) Compressive implant short neck
MC1030, MC1130, MC1330, MC1630: ØD -3.0mm, ØD1 - 1.8mm, L(10, 11.5, 13, 16mm) Compressive implant short neck
MC1033, MC1133, MC1333, MC1633: ØD -3.3mm, ØD1 - 1.8mm, L(10, 11.5, 13, 16mm) Compressive implant short neck
MC0638, MC0838, MC1038, MC1138, MC1338, MC1638: ØD -3.75mm, ØD1 - 1.9mm, L(6, 8 10, 11.5, 13, 16mm) Compressive implant short neck
MC0642, MC0842, MC1042, MC1142, MC1342, MC1642, MC1842: ØD -4.2mm, ØD1 - 1.9mm, L(6, 8 10, 11.5, 13, 16, 18mm) Compressive implant short neck
MC1050, MC1150, MC1350, MC1650: ØD -5.0mm, ØD1 - 1.9mm, L(10, 11.5, 13, 16mm) Compressive implant short neck
MCB1033, MCB1133, MCB1333, MCB1633: ØD -3.3mm, ØD1 - 1.8mm, L(10, 11.5, 13, 16mm) Compressive implant long neck
MCB0638, MCB0838, MCB1038, MCB1138, MCB1338, MCB1638: ØD -3.75mm, ØD1 - 1.9mm, L(6, 8 10, 11.5, 13, 16mm) Compressive implant long neck
MCB0642, MCB0842, MCB1042, MCB1142, MCB1342, MCB1642: ØD -4.2mm, ØD1 - 1.9mm, L(6, 8 10, 11.5, 13, 16mm) Compressive implant long neck
MCB0850, MCB1050, MCB1150, MCB1350, MCB1650: ØD -5.0mm, ØD1 - 1.9mm, L(8, 10, 11.5, 13, 16mm) Compressive implant long neck
MCITK: Full kit including analog and two transfers
PANOP: Analog
PMIC-N: Narrow transfer
PMIC: Snap-on transfer
SKU LIST:
ZG47702: Granules 0.25cc, Bits in vial
ZG47705: Granules 0.5cc, Bits in vial
ZG47710: Granules 1.0cc, Bits in vial
ZG47720: Granules 2.0cc, Bits in vial
ZG47750: Granules 5.0cc, Bits in vial
ZG47755: Blocks 5.0x5.0mm, 4 pcs
ZG47751: Blocks 5.0x10.0mm, 2 pcs
ZG47515: Cones Ø5.0 / H 15.0mm,2 pcs
TA-NB-NP15, TA-NB-NP30, TA-NB-NP45: Straight anatomic snap-on conical transfer NP platform 3.5mm conical connection
TA-NB-RP15, TA-NB-RP30, TA-NB-RP45: Straight anatomic snap-on conical transfer RP platform 4.3-5.0mm conical connection
TAP-NB-NP1515M,TAP-NB-NP1530M: Angulated patented conical snap-on transfer 15° NP platform 3.5mm conical connection
TAP-NB-NP2515M, TAP-NB-NP2530M: Angulated patented conical snap-on transfer 25° NP platform 3.5mm conical connection
TAP-NB-RP1515M,TAP-NB-RP1530M: Angulated patented conical snap-on transfer 15° RP platform 4.3-5.0mm conical connection
TAP-NB-RP2515M, TAP-NB-RP2530M: Angulated patented conical snap-on transfer 25° RP platform 4.3-5.0mm conical connection
SPUT0: Transfer plastic cap
SCA-NP, SCA-RP: Insertion screws narrow and regular
SD-FD: Full kit
The kit includes 2 drivers for each platform, 1 contra-angle, and 1 ratchet compatible, please see the full list
Compatible with Nobel®
• N-2.22H – type Ratchet
• N-2.22H-SK – type Handpiece
• N-2.62H – type Ratchet
• N-2.62H-SK – type Handpiece
Compatible with Osstem®
• O-2.45H – type Ratchet
• O-2.45H-SK – type Handpiece
Compatible with Straumann®
• S-2.97O – type Ratchet
• S-2.97O-SK – type Handpiece
Compatible with Zimmer®
• Z-2.40H – type Ratchet
• Z-2.40H-SK – type Handpiece
Compatible with Dentium®
• D-2.47H – type Ratchet
• D-2.47H-SK – type Handpiece
SKU LIST
SK006C: Full DSI Conical Drills Surgical Kit
LD150: Lance drill Ø1.5mm
PD190: Marking drill Ø1.9mm
PD200: Pilot drill Ø2.0mm
TDE: Drill extender
CD375, CD500: Countersink drills Ø3.75-4.2 and 5.0-6.0mm
LD1520: Lindemann drill Ø1.5-2.0mm
RB38: Round bur Ø3.5mm
MMRA: Motor mount to ratchet adapter
SPP100, SPP160: Jag parallel guide pins L 10 and 16mm
SD2028L16C, SD2832L16C, SD32365L16C, SD3640L16C, SD4045L16C, SD4652L16C: Step drill with DLC coating Ø2.0x2.8, 2.8x3.2, 3.2x3.65, 3.6x4.0, 4.0x4.5, 4.6x5.2mm L 16mm
RDS2015: Ratchet driver for narrow implant Ø2.0mm
MM2028: Motor mount driver for narrow implant Ø2.0mm
RDK24100, RDK24150: Ratchet driver for implant Ø2.42mm L 10 and 15mm
MM24220, MM24028: Motor mount driver for implant Ø2.42mm L 20 and 28mm
RDK125070, RDK125150: Ratchet driver for prosthetics Ø1.25mm L 7.0 and 15.0mm
MM12520, MM12528: Motor mount driver for prosthetics Ø1.25mm L 20.0 and 28.0mm
HDK125070, HDK125150: Manual driver for prosthetics Ø1.25mm L 7.0 and 15.0mm
1000201: Torque ratchet with hexagonal head Ø6.35mm 10-35Ncm
RS6111: Surgical torque ratchet with hexagonal head Ø6.35mm 25-100Ncm
DPKOP: Depth gauge probe measuring tool
PAL94150: Removable stainless steel surgical tray
TD280L6SC, TD320L6SC, TD365L6SC, TD400L6SC, TD450L6SC: DLC coatd stopper drills Ø2.8, 3.2, 3.65, 4.0, 4.5mm
TDC19X27L8CH, TDC19X27L10CH, TDC19X27L115CH, TDC19X27L13CH: Ø1.9-2.7mm L 8, 10, 11.5, 13mm
TDC21X33L8CH, TDC21X33L10CH, TDC21X33L115CH, TDC21X33L13CH: Ø2.1-3.3mm L 8, 10, 11.5, 13mm
TDC28X37L8CH, TDC28X37L10CH, TDC28X37L115CH, TDC28X37L13CH: Ø2.8-3.7mm L 8, 10, 11.5, 13mm
TDC28X40L8CH, TDC28X40L10CH, TDC28X40L115CH, TDC28X40L13CH: Ø2.8-4.0mm L 8, 10, 11.5, 13mm
TDC28X45L8CH, TDC28X45L10CH, TDC28X45L115CH, TDC28X45L13CH: Ø2.8-4.5mm L 8, 10, 11.5, 13mm
SKU LIST:
STN38: Open tray transfer *Narrow*
STS: Open tray transfer *Regular* (Short Screw)
ST13: Open tray transfer *Regular* (Long Screw)
STC9: Closed tray click transfer *Regular* (L 9mm)
STC13: Closed tray click transfer *Regular* (L 13mm)
TMIS15: Closed tray click transfer *Regular* (L 15mm)
SKU LIST:
MUA-NO-10, MUA-NO-20, MUA-NO-30, MUA-NO-40, MUA-NO-50: Straight multi-unit 1.4M
PUD-M14: Abutment position holder
MUA-NO-1720, MUA-NO-1730, MUA-NO-1740, MUA-NO-1750: Angulated multi-unit 17° 1.4M
MUA-NO-3020, MUA-NO-3030, MUA-NO-3040, MUA-NO-3050: Angulated multi-unit 30° 1.4M
MUA-NO-4520, MUA-NO-4530, MUA-NO-4540, MUA-NO-4550: Angulated multi-unit 45° 1.4M
MUA-NO-5220: Angulated multi-unit 52° 1.4M
MUA-NO-6020: Angulated multi-unit 60° 1.4M
SKU LIST
ONEDRILL: One drill system kit
STP7, STP8, STP85, STP9, STP10, STP11, STP115, STP12, STP13: Stopper L (7, 8, 8.5, 9, 10, 11, 11.5, 12, 13mm)
1TD3516, 1TD3816, 1TD4016, 1DT4216, 1TD4516, 1TD4816: one drill Ø3.5, 3.8, 4.0, 4.2, 4.5, 4.8mm
GD3248: guide drill Ø3.5mm
BR: bone remover depth gauge
OPI: opener in tools
OPO: opener out tools
BP: bone pusher
5B-SA: pincette
SKU LIST:
SPI0835, SPI1035, SPI1135, SPI1335, SPI1635: Ø3.5mm H (8, 10, 11.5, 13 and 16mm) SLA premium line spiral implant
SPI0638, SPI0838, SPI1038, SPI1138, SPI1338, SPI1638: Ø3.75mm H (6, 8, 10, 11.5, 13 and 16mm) SLA premium line spiral implant
SPI0642, SPI0842, SPI1042, SPI1142, SPI1342, SPI1642: Ø4.2mm H (6, 8, 10, 11.5, 13 and 16mm) SLA premium line spiral implant
SPI0650, SPI0850, SPI1050, SPI1150, SPI1350, SPI1650: Ø5.0mm H (6, 8, 10, 11.5, 13 and 16mm) SLA premium line spiral implant
SPI0660, SPI0860, SPI1060, SPI1160, SPI1360: Ø6.0mm H (6, 8, 10, 11.5, and 13mm) SLA premium line spiral implant
SPI1030, SPI1103, SPI1330, SPI1630: Ø3.0mm H (10, 11.5, 13 and 16mm) SLA premium line spiral implant
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}