Stopper Drills
DSI Stopper Drills are considered to be "The Safest Drills" they are manufactured specifically for implantation and surgical procedures. They are especially suited for sinus lifting procedures thanks to the special stoppers that make them very safe. These drills are made for maximum accuracy, extremely high reliability, and excellent working capacity during the operation. All the DSI stopper drills are built with a special stopper that does not let the drill go beyond the chosen depth. It is maintaining accuracy and reduces trauma to the patient, which reduces the time of the healing process. The stoppers allow reaching the exact depth without any risk of going further than needed. The drilling process becomes simpler and easier and most importantly - much more accurate. DSI Stopper Drills are 100% compatible with any DSI spiral implant and most of the platforms available on the market such as Alpha-Bio, A.B, ZIMMER, Adin, Cortex, Implant Direct, MIS, and more.
DSI Stopper Drills give a huge advantage for immediate loading, and excellent biocompatibility, to reach the optimal osseointegration and complete healing process with no abruption. Promotes earlier bone apposition and provides greater stability during the first critical weeks after placement.
Product Details
DSI Stopper Drills are available in three options. The integral stopper drills, the DLC-coated stopper drill, and the conical stopper drills. The integral stopper and the DLC-coated drills are mainly used the same way the difference between them is that the DLC coating reduces the heat generation and allows smoother cutting with less vibration. The conical stopper drills are slightly the same and yet they are a little bit different because they are intended for a conical platform and not for the internal hexagon.
DSI Integral Stopper Drills:
PD200L6S, PD200L8S, PD200L10S, PD200L115S, PD200L13S: Stopper drills Ø2.0mm L (6, 8, 10, 11.5, 13mm)
TD280L6S, TD280L8S, TD280L10S, TD280L115S, TD280L13S: Stopper drills Ø2.8mm L (6, 8, 10, 11.5, 13mm)
TD320L6S, TD320L8S, TD320L10S, TD320L115S, TD320L13S: Stopper drills Ø3.2mm L (6, 8, 10, 11.5, 13mm)
TD365L6S, TD365L8S, TD365L10S, TD365L115S, TD365L13S: Stopper drills Ø3.65mm L (6, 8, 10, 11.5, 13mm)
TD400L6S, TD400L8S, TD400L10S, TD400L115S, TD400L13S: Ø4.0mm L (6, 8, 10, 11.5, 13mm)
TD450L6S, TD450L8S, TD450L10S, TD450L115S, TD450L13S: Ø4.5mm L (6, 8, 10, 11.5, 13mm)
DSI DLC Integral Stiopper Drills:
PD200L6SC, PD200L8SC, PD200L10SC, PD200L115SC, PD200L13SC: Stopper drills Ø2.0mm L (6, 8, 10, 11.5, 13mm)
TD280L6SC, TD280L8SC, TD280L10SC, TD280L115SC, TD280L13SC: Stopper drills Ø2.8mm L (6, 8, 10, 11.5, 13mm)
TD320L6SC, TD320L8SC, TD320L10SC, TD320L115SC, TD320L13SC: Stopper drills Ø3.2mm L (6, 8, 10, 11.5, 13mm)
TD365L6SC, TD365L8SC, TD365L10SC, TD365L115SC, TD365L13SC: Stopper drills Ø3.65mm L (6, 8, 10, 11.5, 13mm)
TD400L6SC, TD400L8SC, TD400L10SC, TD400L115SC, TD400L13SC: Ø4.0mm L (6, 8, 10, 11.5, 13mm)
TD450L6SC, TD450L8SC, TD450L10SC, TD450L115SC, TD450L13SC: Ø4.5mm L (6, 8, 10, 11.5, 13mm)
All the drills are made of stainless steel and are autoclavable at a temperature of 134° C. Recommended use cycles for the stopper drills are 30 cycles for regular ones and 50 cycles for DLC coated.
Features
• Lower bone heating - and as the result- no bone necrosis peril
• Compatible with internal-hex systems, such as Alpha-Bio, A.B, ZIMMER, Adin, Cortex, Implant Direct, MIS, and more
• Can be sterilized in an autoclave
• Most useful and affordable
• Made for maximum accuracy, extremely high reliability, and excellent working capacity
• Built with a special stopper
• Maintaining accuracy and reducing trauma to the patient
• Reaching the exact depth without any risk of going further
• DLC dark grey coating reduces the drill's vibration and the cutting temperature
• Adapted specifically to the anatomical shape of the implant
• Less heat generation, fewer vibrations, longer lifespan, and outstanding stability.
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}