Compressive Implant
DSI compressive implants are very simple and convenient to use allowing single-stage protocol implantation. These implants save time, reduce trauma for the patient, and produce an outstanding aesthetic at the final restoration. DSI compressive implant is mostly used for multi-unit restorations with immediate loading in the maxilla & mandible with adequate bone tissue. It is a narrow-diameter implant that is especially suitable for usage in areas with limited space such as laterals and central incisors. The unique structure of the threads creates increased bone-to-implant contact along the implant body, which leads to a great load capacity. An optional bendable neck allows adjusting the abutment slope angle up to 20°, a very useful feature in limited space unparallel cases.
All DSI implants undergo the strictest quality control measures. DSI assures that a high percentage of samples are taken from every batch. Each sample passes a very strict set of tests of cleanliness and conformity. Thus providing minimal rejections afterward. All of the products attend to the highest international standards. All DSI Implants implants are made of titanium alloy Ti-6Al-4V ELI, in accordance with ASTM-F136-02
Product Details
DSI compressive implant provides very high stability and eliminates the risks that can arise during normal two-stage implantation, such as micro displacements of the structure or a trapped screw. These implants are very reliable, proven over time, reduce trauma and bone loss, and ensure exceptional long-term stability. The latest addition to the line - is a 2.4mm UltraSlim diameter. Designed for placement in the limited tooth spacing of the laterals and central incisors.
RBM surface treatment:
Resorbable blast media (RBM) treatment is a process that utilizes high-speed particle blasting biocompatible calcium phosphate materials. It differentiates from traditional grit-blasting abrasives in that the implant's surface is not exposed to alumina or silicon carbide materials. In the resorbable blast material method, the excessive use of acids for particle debris removal is no longer necessary as it does not penetrate deep into the titanium surface while still delivering homogenous micro and macro porosity for the optimal implant surface topography both at cellular and protein levels. This method provides a much cleaner textured finish absent of any contaminants typically associated with other grit-blasting elements.
Features
• RBM surface treatment for better osseointegration and reduced bacterial migration.
• High-stability restorations
• Fast Insertion and excellent primary stability
• Survival rates - High and consistent survival rates (over 97% after a five-year follow-up).
• Bone Preservation - Average bone loss of <1 mm after five years (Based on the implant loading time).
• No Peri-Implantitis - Very low prevalence of peri-implantitis over the 5-year follow-up period.
• No aluminum contaminants - Mean a more successful and accelerated process of osseointegration than ever.
• The unique structure of the threads creates increased bone-to-implant contact along the implant body
• Allows treatment of narrow spaces that cannot be otherwise handled with larger two-piece implants.
• The uniform structure of the implant enables immediate loading while preserving a very high success rate.
• Bendable neck allows adjusting the abutment slope angle up to 20°
• Special Compressive threads.
• Immediate loading.
• Simple placement & prosthetic procedure.
• Bone condensation design.
• No pumping effect.
MC1024, MC1124, MC1324: ØD -2.4mm, ØD1 - 1.7mm, L(10, 11.5, 13mm) Compressive implant short neck
MC1028, MC1128, MC1328, MC1628: ØD -2.8mm, ØD1 - 1.8mm, L(10, 11.5, 13, 16mm) Compressive implant short neck
MC1030, MC1130, MC1330, MC1630: ØD -3.0mm, ØD1 - 1.8mm, L(10, 11.5, 13, 16mm) Compressive implant short neck
MC1033, MC1133, MC1333, MC1633: ØD -3.3mm, ØD1 - 1.8mm, L(10, 11.5, 13, 16mm) Compressive implant short neck
MC0638, MC0838, MC1038, MC1138, MC1338, MC1638: ØD -3.75mm, ØD1 - 1.9mm, L(6, 8 10, 11.5, 13, 16mm) Compressive implant short neck
MC0642, MC0842, MC1042, MC1142, MC1342, MC1642, MC1842: ØD -4.2mm, ØD1 - 1.9mm, L(6, 8 10, 11.5, 13, 16, 18mm) Compressive implant short neck
MC1050, MC1150, MC1350, MC1650: ØD -5.0mm, ØD1 - 1.9mm, L(10, 11.5, 13, 16mm) Compressive implant short neck
MCB1033, MCB1133, MCB1333, MCB1633: ØD -3.3mm, ØD1 - 1.8mm, L(10, 11.5, 13, 16mm) Compressive implant long neck
MCB0638, MCB0838, MCB1038, MCB1138, MCB1338, MCB1638: ØD -3.75mm, ØD1 - 1.9mm, L(6, 8 10, 11.5, 13, 16mm) Compressive implant long neck
MCB0642, MCB0842, MCB1042, MCB1142, MCB1342, MCB1642: ØD -4.2mm, ØD1 - 1.9mm, L(6, 8 10, 11.5, 13, 16mm) Compressive implant long neck
MCB0850, MCB1050, MCB1150, MCB1350, MCB1650: ØD -5.0mm, ØD1 - 1.9mm, L(8, 10, 11.5, 13, 16mm) Compressive implant long neck
MCITK: Full kit including analog and two transfers
PANOP: Analog
PMIC-N: Narrow transfer
PMIC: Snap-on transfer
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}
